In the electromechanical industry, there are cleaning requirements from mechanical parts to mechanical parts, from electrical parts to electrical parts, such as gears, crankshafts and even gearboxes, as well as mechanical and electrical assemblies on electrical parts, as well as some precision mechanical parts and electrical parts, which are inseparable from cleaning. Most enterprises adopt traditional cleaning methods, such as infiltration cleaning and spray cleaning. This cleaning method is not only labor-intensive, but also easy to cause environmental pollution and waste of water resources. At present, many enterprises begin to carry out technical transformation and adopt ultrasonic cleaning to eliminate the disadvantages of traditional cleaning, especially some mechanical parts with complex shapes, which are powerless by traditional cleaning.

超声波清洗在轻纺行业中的应用

Application of ultrasonic cleaning in light textile industry

轻工行业，如空调、冷柜、冰箱中的压缩机；钟表零件、手表元件等；纺织行业，如精密纺织器材、喷丝嘴等；珠宝行业，如金银首饰、珠宝玉器等，都需要清洗，有些零件、部件和组件，如压缩机、喷丝嘴等或形状复杂，或盲孔、微孔，只能由超声波清洗，有些规模生产厂甚采用超声波链式或升降式成套设备。

Light industry, such as compressors in air conditioners, freezers and refrigerators; Watch parts, watch components, etc; Textile industry, such as precision textile equipment, spinneret, etc; The jewelry industry, such as gold and silver jewelry, jewelry and jade, needs cleaning. Some parts, components and components, such as compressors and spinnerets, have complex shapes, or blind holes and micropores, which can only be cleaned by ultrasonic. Some large-scale production plants even use ultrasonic chain or lifting complete sets of equipment.

超声波清洗在表面处理行业的应用

Application of ultrasonic cleaning in surface treatment industry

表面处理是轻工行业的组成部分，包含机械零件电镀、金属和非金属机箱柜涂覆、光学玻璃或镜片镀膜等，电镀前后或涂覆前的清洗采用超声波清洗技术已成为一种新的典型工艺，特别是军工电子产品中的一些多芯插座，因质量要求必须进行电镀，而电镀后其质量要求多芯之间必须绝缘，往往因电镀后致使多芯间不绝缘，采用丙酮、酒精等方法浸润清洗后测试其阻值要求无穷大，但达不到质量要求，而采用超声波清洗，经烘干后，则完全达到质量要求。将超声波直接引入电镀还可提高镀液的匀度和镀层的密度。

Surface treatment is an integral part of the light industry, including electroplating of mechanical parts, coating of metal and non-metal chassis and cabinets, coating of optical glass or lens, etc. ultrasonic cleaning technology has become a new typical process before and after electroplating or before coating. In particular, some multi-core sockets in military electronic products must be electroplated due to quality requirements, and after electroplating, the quality requires that the multi-core must be insulated, The multi-core is often not insulated after electroplating. The resistance value is required to be infinite after immersion cleaning with acetone, alcohol and other methods, but it can not meet the quality requirements. However, ultrasonic cleaning can fully meet the quality requirements after drying. The direct introduction of ultrasonic wave into electroplating can also improve the uniformity of plating solution and the density of coating.

超声波清洗在军事装备领域的应用

Application of ultrasonic cleaning in military equipment field

军事装备不外乎光、机、电类装备或光、机、电一体化装备，军事装备在储备状态下，储存于军事仓库，这些装备在储备、训练、演习状态均免不了尘埃、污垢的吸附、污染，特别是一些复杂的兵器装备靠人工擦拭保养，难度较大，而一旦采用超声波清洗技术保养兵器装备，问题迎刃而解

Military equipment is nothing more than optical, mechanical and electrical equipment or optical, mechanical and electrical integrated equipment. When military equipment is in reserve, it is stored in military warehouses. These equipment can not avoid the adsorption and pollution of dust and dirt in reserve, training and exercise. In particular, some complex weapons and equipment are difficult to maintain by manual wiping. Once ultrasonic cleaning technology is used to maintain weapons and equipment, the problem will be solved

超声波清洗机设备专注行业发展十几年，真诚服务顾客,专注客户需求,您有不明确的内容可点击网站进行详细了解：http://www.sinokohl.com

Ultrasonic cleaning machine equipment has focused on the development of the industry for more than ten years, sincerely serving customers and focusing on customer needs. If you have unclear content, you can click the website to learn more: http://www.sinokohl.com