服务热线电话

400-6188-756

换溶剂别只问“能不能溶”

来源:http://www.sinokohl.com/ 时间: 2026-11-14 浏览次数: 0

碳氢清洗机买回来,车间非常常干的一件事:换批零件,油不一样了,洗不干净,第一反应是"换种碳氢溶剂试试"。采购拿个MSDS过来,看闪点、看KB值,觉得差不多就下单。结果洗了三天,蒸馏釜开始起泡、超声槽漂油花、干燥完工件表面发雾。

The most common task in the workshop when buying a hydrocarbon cleaning machine is to change the batch of parts. If the oil is different and cannot be cleaned thoroughly, the first reaction is to "try changing the hydrocarbon solvent". Bring an MSDS for procurement, check the flash point and KB value, and place an order if they are similar. After washing for three days, the distillation kettle began to bubble, the ultrasonic tank floated oil droplets, and after drying, the surface of the workpiece became foggy.

5D3_3970-副本

问题出在:碳氢不是单一化学品,是C9–C16烷烃的混合物,不同馏分"性格"完全不同。

The problem lies in the fact that hydrocarbons are not a single chemical, but a mixture of C9-C16 alkanes, and the "characteristics" of different fractions are completely different.

按油污选馏分,不按价格选

Select fractions based on oil pollution, not based on price

轻馏分(C9–C11,沸点150–180℃):渗透快、挥发快,适合轻油、脱脂、表干要求高的小件;但溶解力弱,重防锈油泡半天还是膜;

Light fractions (C9-C11, boiling point 150-180 ℃): fast permeation and volatilization, suitable for small parts with high requirements for light oil, degreasing, and surface dryness; But the solubility is weak, and even after soaking in heavy rust proof oil for half a day, it still forms a film;

中馏分(C11–C13,沸点180–220℃):平衡型,多数切削油、拉伸油能溶,干燥温度适中,通用优选;

Medium distillate (C11-C13, boiling point 180-220 ℃): Balanced type, most cutting oils and stretching oils are soluble, with moderate drying temperature, commonly preferred;

重馏分(C13–C16,沸点220–280℃):溶解力强,抛光蜡、厚油脂、交联固化残胶能啃动;但沸点高,真空干燥负担大,低温下工件表面易留软膜。

Heavy fraction (C13-C16, boiling point 220-280 ℃): Strong solubility, able to gnaw on polishing wax, thick grease, and cross-linked curing residue; But the boiling point is high, the burden of vacuum drying is heavy, and a soft film is easily left on the surface of the workpiece at low temperatures.

换溶剂前先做三件事

Do three things before changing the solvent

测旧油污的溶解性:取少量废油滴入候选溶剂,看是"瞬间散开"还是"团成球"。团成球的溶剂,批量洗必留残膜;

Measure the solubility of old oil stains: Take a small amount of waste oil and drop it into the candidate solvent to see if it "instantly disperses" or "clumps into balls". The solvent used to form balls will leave residual film after batch washing;

查沸点跨度:窄馏分(沸点区间<30℃)蒸汽浴洗均匀、干燥干净,但贵;宽馏分便宜但干燥时轻组分先跑、重组分残留,表面发黏;

Check boiling point range: narrow fractions (boiling point range<30 ℃) are evenly washed and dried in a steam bath, but expensive; Wide fractions are cheap, but when dried, light components run away first, heavy components remain, and the surface becomes sticky;

看闪点和车间防爆等级的匹配:低闪点(<40℃)溶剂在普通防爆区可能不合规,别只看"碳氢都差不多"。

Match between flash point and workshop explosion-proof level: Low flash point (<40 ℃) solvents may not comply with regulations in ordinary explosion-proof areas, don't just look at "carbon and hydrogen are similar".

溶剂混用是大忌

Mixing solvents is a major taboo

现场常见:旧槽里还剩半槽中馏分,新到的轻馏分直接倒进去"调稀"。结果馏分交叉,蒸汽浴洗时冷凝不均匀,工件表面出现"泪痕"状油纹。不同批次、不同供应商的碳氢,即使标称KB值一样,芳烃含量和硫含量不同,混用后蒸馏再生时容易起泡带液,脏溶剂跟着干净溶剂一起回到漂洗槽。

On site common: Half of the distillate in the old tank remains, and the newly arrived light distillate is directly poured into the "dilution" tank. As a result, the fractions intersected and the condensation was uneven during steam bath washing, resulting in "tear like" oil streaks on the surface of the workpiece. Different batches and suppliers of hydrocarbons, even if the nominal KB value is the same, have different aromatic and sulfur contents. When mixed and distilled for regeneration, they are prone to foaming and liquid carryover, and dirty solvents return to the rinse tank along with clean solvents.

蒸馏釜告诉你溶剂"老了"没有

Distillation kettle tells you if the solvent is "old" or not

蒸馏残渣颜色从浅黄变深棕→溶剂中高沸物累积,溶解力下降;

The color of the distillation residue changes from light yellow to dark brown, and high boiling point substances accumulate in the solvent, resulting in a decrease in solubility;

蒸馏过程中泡沫层超过视镜1/3→溶剂里混了表面活性剂或水分超标;

During distillation, the foam layer exceeds 1/3 of the sight glass → the solvent is mixed with surfactant or the moisture exceeds the standard;

回收液冷却后浑浊分层→两种不互溶的碳氢混在一起了,或者进了水基清洗剂残留。

After cooling, the recycled liquid becomes turbid and layered, resulting in the mixing of two immiscible hydrocarbons or residual water-based cleaning agents.

验收新溶剂带三滴

Acceptance of new solvent with three drops

不靠供应商的"典型数据表"。到货后取:

Not relying on the supplier's' typical data sheet '. After arrival, pick up:

一滴涂铝片上,80℃烘干看残迹(有黄斑说明含硫或芳烃超标);

On a drop of coated aluminum sheet, dry at 80 ℃ to see the residue (yellow spots indicate excessive sulfur or aromatic hydrocarbons);

一滴加等量废水,摇匀静置看分层速度(>5分钟不分层说明亲水杂质多);

Add an equal amount of wastewater in one drop, shake well and let it stand to observe the stratification speed (>5 minutes without stratification indicates more hydrophilic impurities);

一滴滴在已知油污的试片上,计时完全溶解的秒数,对比旧溶剂。

Drop by drop on a test piece with known oil stains, measure the number of seconds until completely dissolved, and compare with the old solvent.

碳氢清洗机的溶剂选型,不是"买桶溶剂倒进槽",是把"工件油污—馏分匹配—沸点窗口—蒸馏再生—防爆合规"对上号。换批零件洗不干净,先拿滴管做溶解实验,比换设备参数管用。

The solvent selection for hydrocarbon cleaning machines is not about "buying barrels of solvent and pouring them into the tank", but about aligning "workpiece oil stains - fraction matching - boiling point window - distillation regeneration - explosion-proof compliance". The replacement parts cannot be cleaned thoroughly. First, use a dropper to conduct a dissolution experiment, which is more effective than changing the equipment parameters.

联系我们

詹老师:18663767799(微信同号)

陶老师:13011716033(微信同号)

张老师:18663767790(微信同号)

:1476171179/1500705758

:jnkergs@163.com

:地址:山东省济南市济阳区创业路与启航街交叉口南40米

关注科尔

  • 扫一扫了解更多

  • 扫一扫了解更多

备案号:鲁ICP备18049717号-1  鲁公网安备37011202000628号