Ultrasonic cleaning machine equipment can be divided into two categories: general ultrasonic cleaning machine and special ultrasonic cleaning machine. These two types have their own uniqueness. In this paper, the product structure and characteristics of general and special ultrasonic cleaning machines are analyzed and introduced in detail. At the same time, through comparison, the differences and uniqueness of the two ultrasonic cleaning machines can be found, as explained below:

1、 专用超声波清洗机：

1. Special ultrasonic cleaning machine:

一般安装在生产线上，用于清洗某些特定物体。典型的超声波清洗设备介绍：清洗后的物体从进料口可驱动的不锈钢专用网带送入超声波清洗槽进行清洗，经喷涂、干燥等工序后排放，这样清洁后的物品可以直接包装和储存。

It is usually installed on the production line to clean certain specific objects. Introduction to typical ultrasonic cleaning equipment: the cleaned objects are sent to the ultrasonic cleaning tank from the stainless steel mesh belt that can be driven by the feed inlet for cleaning, and then discharged after spraying, drying and other processes. In this way, the cleaned objects can be directly packaged and stored.

各工序简要说明如下：

Brief description of each process is as follows:

进料：物件进料可采用半自动进料；物件出料可采用自动收料或手工收料方式，格被清洗物件装入包装盒内。

Feeding: semi-automatic feeding can be adopted for the feeding of articles; The material can be discharged automatically or manually, and the cleaned objects can be put into the packaging box.

2、 通用超声波清洗机：

2. Universal ultrasonic cleaning machine:

其结构一般有两种情况：超声波电源与清洗机集成或分开布置。一般来说，小功率（200W以下）清洗机采用整体式结构，大功率清洗机采用分体式结构。

Its structure generally has two conditions: the ultrasonic power supply and the cleaning machine are integrated or arranged separately. Generally speaking, the low-power (below 200W) cleaning machine adopts the integral structure, and the high-power cleaning machine adopts the split structure.

超声波清洗机的分体式结构由三个主要部分组成：超声换能器、清洗缸（清洗槽）、超声波发生器。清洗缸是一个不锈钢容器，用于装载清洗液和清洗后的工件，知名的清洗设备厂家一般用304不锈钢作为槽体材料。大多数工件可以先安装在网架内，然后一起放入圆筒内进行清洗。超声波发生器：超声波清洗机所用的超声波发生器根据所用元件的类型可分为电子管型、晶闸管型和晶体管型。近年来，人们开始采用大功率“功率模块”的方法。输出功率从几十瓦到几千瓦不等，任务频率从15KHz到40KHz不等。

The split structure of the ultrasonic cleaning machine consists of three main parts: ultrasonic transducer, cleaning cylinder (cleaning tank) and ultrasonic generator. The cleaning cylinder is a stainless steel container used for loading cleaning fluid and cleaned workpieces. Well known cleaning equipment manufacturers generally use 304 stainless steel as the tank material. Most workpieces can be installed in the grid frame first, and then put into the cylinder together for cleaning. Ultrasonic generator: the ultrasonic generator used in the ultrasonic cleaning machine can be divided into electronic tube type, thyristor type and transistor type according to the type of components used. In recent years, people begin to adopt the method of high-power "power module". The output power ranges from tens of watts to thousands of watts, and the task frequency ranges from 15KHz to 40KHz.

本文的精彩内容由全自动超声波清洗机供知识提供，本网站还有很多的精彩内容，更多的内容您可以点击进入：http://www.sinokohl.com我们有专门的客服为您解答问题

The wonderful content of this article is provided by the full-automatic ultrasonic cleaning machine. There are many wonderful content on this website. You can click to enter more content: http://www.sinokohl.com We have special customer service to answer your questions