服务热线电话
400-6188-756
实验室超声波清洗机的保养要注意什么?
来源:http://www.sinokohl.com/ 时间: 2023-09-13 浏览次数: 0
将实验室超声波清洗机放置在远离细菌的地方。
Place the laboratory ultrasonic cleaning machine away from bacteria.
实验室超声波清洗机一般由304材料制成。通常使用后,为了防止事故发生,实验室超声波清洗机应及时放置在远离细菌的地方,为了避免各种细菌的侵蚀对设备造成损坏与污染。
Laboratory ultrasonic cleaning machines are generally made of 304 material. After normal use, in order to prevent accidents, the laboratory ultrasonic cleaning machine should be placed away from bacteria in a timely manner to avoid damage and pollution caused by the erosion of various bacteria on the equipment.
及时清洗工作后留下的顽固污垢。
Timely clean stubborn dirt left after work.
每次使用实验室超声波清洗机后,应及时进行超声波清洗机的清洗工作,清洗槽内残余的液体与表面意外掉落的液体与污垢,以免影响后续超声波清洗机的正常使用。这是因为一旦顽固污垢长时间附着在清洗机上,可能会影响清洗机的正常使用和清洗效果。
After each use of the laboratory ultrasonic cleaning machine, the cleaning work of the ultrasonic cleaning machine should be carried out in a timely manner. The residual liquid in the cleaning tank and the liquid and dirt accidentally dropped from the surface should be cleaned to avoid affecting the normal use of the subsequent ultrasonic cleaning machine. This is because once stubborn dirt adheres to the cleaning machine for a long time, it may affect the normal use and cleaning effect of the cleaning machine.


定期检查实验室超声波清洗机的关键部件。
Regularly inspect key components of laboratory ultrasonic cleaning machines.
无论实验室超声波清洗机的质量如何,都应通过定期检查来观察关键部件的运行状态。有了这些部件,清洗机可以稳定运行。如果零件维护不当,清洗机内外会出现不同程度的问题,实验仪器可能会因机器故障而损坏,因此应避免这种情况。
Regardless of the quality of the laboratory ultrasonic cleaning machine, the operation status of key components should be observed through regular inspections. With these components, the cleaning machine can operate stably. If the parts are not properly maintained, there may be varying degrees of problems inside and outside the cleaning machine, and the experimental instruments may be damaged due to machine malfunctions. Therefore, this situation should be avoided.
感谢您的阅读,此文的文章来源:超声波清洗机更多的内容和问题请点击: http://www.sinokohl.com我们会继续努力的为您提供服务,感谢您的支持!
Thank you for reading. The source of this article is: Ultrasonic Cleaning Machine. For more information and questions, please click on: http://www.sinokohl.com We will continue to work hard to provide you with services. Thank you for your support!
上一篇:选择高速清洗机的优势分析及特点
下一篇:工业清洗机工作流程要注意什么?
相关文章
-
喷淋清洗机|高压喷淋如何实现工业零部件全方位无死角清洗? 2026-02-25
-
通过式喷淋清洗机全解析:高压喷淋如何实现高效除油与批量清洗? 2026-02-25
-
超声波清洗机热销款解析:36 头大容量机型为何成为人工操作首选? 2026-02-25
-
低温废水处理设备提高水质回收率,减少委外处理量,从环保绿色角度保护水资源 2026-02-19
-
喷淋清洗机实操详解!304不锈钢打造,清洗漂洗风切一体,新手也能看懂 2026-02-13
-
高压去毛刺清洗机实测!替代4-5个熟练工,手机中框去毛刺干净又省成本 2026-02-12
-
重工清洗破局!8吨承重+3.2米大托盘,单工位旋转喷淋机,油污一键清零 2026-02-10
-
10万就能定制!通过式清洗机实操拆解,3工位+304不锈钢,省工又省水 2026-02-06
-
滤芯堵塞=故障高发!碳氢清洗机90%常见问题速解指南 2026-02-04
-
大件清洗破局!科尔通过式喷淋清洗机,360°无死角解锁高效洁净 2026-02-02

新闻中心




公司动态







鲁公网安备37011202000628号