服务热线电话

400-6188-756

超声波脱脂技术在电镀行业使用特点

来源:http://www.sinokohl.com/ 时间: 2023-02-22 浏览次数: 0

利用超声波在液体空化效应,表面可水洗石油的积聚,用适当的清洁剂,很快达到很高的清洁度的表面处理。电镀工艺,表面清洁度较高,使用了超声波清洗技术,可以使许多传统的清洗过程简化,作为一种替代电解脱脂,脱脂溶剂替代,替代酸和氧化生锈,大大提高清洗质量和生产力。超声波振板的特点的空化气泡密度均匀,针对形状更复杂,要求高的工件更优越。利用超声波清洗技术,可以代替大范围使用酸碱的现象,减少环境污染,改善工作环境,降低劳动强度。
Using ultrasonic wave in liquid cavitation effect, the accumulation of oil on the surface can be washed by water. With proper detergent, the surface treatment with high cleanliness can be achieved quickly. Electroplating process, with high surface cleanliness, uses ultrasonic cleaning technology, which can simplify many traditional cleaning processes. As a substitute for electrolytic degreasing, degreasing solvent, acid and oxidation rust, it can greatly improve cleaning quality and productivity. The ultrasonic vibration plate is characterized by uniform density of cavitation bubbles, which is superior to the workpiece with more complex shape and high requirements. The use of ultrasonic cleaning technology can replace the widespread use of acid and alkali, reduce environmental pollution, improve the working environment and reduce labor intensity.
应用情况
Application
表面抛光,抛光膏清洗。
Surface polishing, polishing paste cleaning.
正常情况下抛光蜡是经常使用的,石蜡分子在室温下,材料难以清洁,使用超声波清洗工艺,可以比传统的高温蒸煮、洗涤有机溶剂清洗效果较好,使用水基清洗剂,在温度条件,几分钟快速彻底清洗表面。
Under normal conditions, polishing wax is often used. The paraffin molecule is difficult to clean at room temperature. Using ultrasonic cleaning process can achieve better cleaning effect than traditional high-temperature cooking and washing organic solvent. Using water-based cleaning agent, the surface can be cleaned thoroughly and quickly in a few minutes under temperature conditions.
对于表面的油或防锈,使用超声波清洗工艺的优点:不仅能迅速使表面清洁,但也具有较高的表面活性,这是传统的强酸浸泡工艺无法比拟的。
For oil or rust on the surface, the advantages of ultrasonic cleaning process: it can not only clean the surface quickly, but also has high surface activity, which is incomparable with the traditional strong acid immersion process.
多槽手动超声波清洗机
表面氧化的工件。
Workpiece with oxidized surface.
采用超声波处理技术,改变传统的酸浸泡洗,迅速表面油脂,防锈,避免相关氢脆问题的产生。
The ultrasonic treatment technology is adopted to change the traditional acid immersion washing, quickly remove the surface grease, prevent rust and avoid the occurrence of related hydrogen embrittlement problems.
环境保护
environmental protection
超声波清洗技术属于物理范畴,对保护环境起到良好的作用,倡导真正的绿色清洗。
Ultrasonic cleaning technology belongs to the physical category, plays a good role in protecting the environment, and advocates true green cleaning.
近20年来,电镀电泳电装喷涂厂家使用电镀超声波清洗设备,取代了原有的酸碱电镀线处理,是达到成功的,电镀质量和产量大增,比原来的清洁速度提高,并改善了生产环境,取得了良好的经济效益和社会效益。
In the past 20 years, the electroplating and electrophoretic coating manufacturers have used electroplating ultrasonic cleaning equipment to replace the original acid-base electroplating line treatment, which has achieved success. The electroplating quality and output have been greatly increased, and the cleaning speed has been improved compared with the original, and the production environment has been improved, and good economic and social benefits have been achieved.

联系我们

詹老师:18663767799(微信同号)

陶老师:13011716033(微信同号)

张老师:18663767790(微信同号)

:1476171179/1500705758

:jnkergs@163.com

:地址:山东省济南市济阳区创业路与启航街交叉口南40米

关注科尔

  • 扫一扫了解更多

  • 扫一扫了解更多

备案号:鲁ICP备18049717号-1  鲁公网安备37011202000628号