1. Automatic conveying chain: made of stainless steel and driven by chain, it moves forward continuously to ensure the stable and accurate operation of the cleaning basket.

2.有两套喷淋清洗系统，一套采用化学喷淋清洗，两套采用喷淋漂洗，三套采用喷淋漂洗，四套采用喷淋漂洗，五套采用喷淋防锈，内腔设有带不锈钢喷嘴的喷嘴。上下喷淋管的喷嘴布置不当，可以保障被清洗工件的各个方面，无需在清洗区域喷洒淋盲区，从而保障工件清洗的清洁度。

2. There are two sets of spray cleaning systems, one is chemical spray cleaning, two are spray rinsing, three are spray rinsing, four are spray rinsing, five are spray antirust, and the inner cavity is equipped with nozzles with stainless steel nozzles. Improper nozzle arrangement of the upper and lower spray pipes can ensure all aspects of the cleaned workpiece without spraying the blind area in the cleaning area, so as to ensure the cleanliness of workpiece cleaning.

3.除油装置：在前清洗站处理量大，所以清洗液含油量高。为了防止排水中的油含量过高，该站配备了一个除油系统。

3. Oil removal device: the treatment capacity of the front cleaning station is large, so the oil content of the cleaning fluid is high. In order to prevent excessive oil content in the drainage, the station is equipped with an oil removal system.

4.过滤器循环系统：使清洁剂在过滤罐中循环，以提高清洁效果。使用袋式过滤器。

4. Filter circulation system: circulate the detergent in the filter tank to improve the cleaning effect. Use a bag filter.

5.水切割系统：喷淋清洗机的水切割内腔单独排入主排水管，进出料外设置隔离段，防止水雾逸出;前后都有可拆卸的检修窗，便于设备维护和清洁。

5. Water cutting system: the water cutting inner cavity of the spray washer is separately discharged into the main drainage pipe, and an isolation section is set outside the inlet and outlet to prevent water mist from escaping; There are removable access windows at the front and rear to facilitate equipment maintenance and cleaning.

6.抽气系统：的每个喷雾和切风部分都有一个抽气孔，在侧面与主管相连。主管前端配置有除雾塔内装拉西环，配备离心风机进行抽气。

6. exhaust system: each spray and cut wind section has a suction hole connected to the side on the side. The front end of the main pipe is equipped with a demister tower, a Raschig ring is installed in it, and a centrifugal fan is equipped for air extraction.

7.电气控制系统：独立控制柜配有PLC可编程控制器、变频器、接触器等主要电气控制元件，由进口的元器件组装而成，性能稳定可靠，使用寿命长。参见控制电路的电气控制图。

7. Electrical control system: the independent control cabinet is equipped with PLC programmable controller, frequency converter, contactor and other main electrical control components, which are assembled from imported components, with stable and reliable performance and long service life. Refer to the electrical control diagram of the control circuit.