1、设计实用

1. Design Practical

在研发和生产时采用的是实用的设计理念，产品是针对大中小型企业、工厂、医疗和生活中所用到的仪器而设计的。高品质的五金超声波清洗机为了让使用者能简单操控仪器，采用的是一键操控的模式，保证产品质量的同时在外观上研发团队还追求完美的外观设计。

The practical design concept is adopted in research and production, and the products are designed for instruments used in large, medium and small enterprises, factories, medical and daily life. The high-quality hardware ultrasonic cleaning machine adopts a one click control mode to enable users to easily operate the instrument, ensuring product quality while pursuing perfect appearance design by the R&D team.

2、工艺新颖

2. Innovative craftsmanship

五金超声波清洗的工作中设定了清洗流程在进行转换时，每秒产生的高速振荡迅速对仪器进行清洁消毒和灭菌，仪器的转换效率非常高。特有的防漏水新工艺的研发，加上高效的超声波空化效应的原理，取代了传统的手工洗刷的方法，原本清洗不到的地方通过水分子在超声波的作用下震荡，把表面和死角缝隙处的污物震落。

In the work of hardware ultrasonic cleaning, the cleaning process is set to generate high-speed oscillations every second during conversion, which quickly clean, disinfect, and sterilize the instrument. The conversion efficiency of the instrument is very high. The research and development of a unique leak proof new process, combined with the principle of efficient ultrasonic cavitation effect, has replaced the traditional manual washing method. Areas that could not be cleaned are shaken by water molecules under the action of ultrasonic waves, causing dirt on the surface and dead corners to fall off.

3、清洗效果好

3. Good cleaning effect

全自动五金超声波清洗机在工作时，对所清洗仪器的狭缝、凹槽、深孔和盲孔表面和内部细小零件的清洗得心应手，同时在除油、除锈和除氧化物等方面也有较好的效果。

The fully automatic hardware ultrasonic cleaning machine is adept at cleaning the narrow slits, grooves, deep holes, and blind holes on the surface and internal small parts of the cleaned instrument during operation. It also has good effects in oil removal, rust removal, and oxide removal.

一方面破坏污垢的吸附和清洁零件的表面，另一方面会造成污垢层的疲劳损伤而脱落。气泡的振动擦洗固体表面。一旦污垢层有了可以钻的缝，气泡立即“钻”进去，振动使污垢层脱落。由于空化作用，两种液体在界面上迅速分散和乳化。当固体颗粒被油渍包裹，附着在清洁件表面时，油被乳化，固体颗粒自行脱落。

On the one hand, it can disrupt the adsorption of dirt and clean the surface of parts, and on the other hand, it can cause fatigue damage and detachment of the dirt layer. The vibration of bubbles cleans solid surfaces. Once there is a hole in the dirt layer that can be drilled, bubbles immediately "drill" in, and vibration causes the dirt layer to fall off. Due to cavitation, the two liquids quickly disperse and emulsify at the interface. When solid particles are wrapped in oil stains and adhere to the surface of cleaning parts, the oil is emulsified and the solid particles fall off on their own.

本文由多槽手动超声波清洗机友情奉献.更多有关的知识请点击:http://www.sinokohl.com真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is a friendly contribution from a multi slot manual ultrasonic cleaning machine For more information, please click: http://www.sinokohl.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.