切削液处理随着城市化进程的不断加快，废液低温蒸发器运用得越来越普遍，特别是在工业废水方面，低温废水处理设备运行原理及特点是怎么样的呢？新坤远环保小编就此问题和大家一起聊一聊。

　　With the continuous acceleration of urbanization, the use of low-temperature evaporators for waste liquid in cutting fluid treatment is becoming increasingly common, especially in industrial wastewater. What are the operating principles and characteristics of low-temperature wastewater treatment equipment? New Kunyuan Environmental Protection Editor would like to discuss this issue with everyone.

　　蒸发器开始是由反应釜，到单效蒸发器，多效蒸发器，MVR蒸发器，以及到现在的低温蒸发器。适用于切削液、乳化液、清洗剂、电镀废水等处理，以提高水质回收率，减少委外处理量，从环保绿色角度保护水资源。

　　The evaporator started from the reaction kettle, to the single effect evaporator, multi effect evaporator, MVR evaporator, and now to the low-temperature evaporator. Suitable for the treatment of cutting fluids, emulsions, cleaning agents, electroplating wastewater, etc., to improve water quality recovery rate, reduce outsourced treatment volume, and protect water resources from an environmental and green perspective.

　　低温废水处理设备运行原理及特点，低温废水处理设备运行，是将废水收集至原液罐，由原液罐到中液位后，自动进水，水泵运行产生真空，压缩机运行产生热量给蒸发罐内废水加热，在真空状态下，废水温度上升到38℃左右，废水开始蒸发，然后通过蒸发浓缩过程，开始排出浓缩液。以上过程为全自动，不需要人工干涉。

　　The operating principle and characteristics of low-temperature wastewater treatment equipment. The operation of low-temperature wastewater treatment equipment is to collect wastewater into the original liquid tank. After the original liquid tank reaches the medium liquid level, water automatically enters the tank. The water pump generates vacuum, and the compressor generates heat to heat the wastewater in the evaporation tank. In the vacuum state, the wastewater temperature rises to about 38 ℃, and the wastewater begins to evaporate. Then, through the evaporation and concentration process, the concentrated liquid begins to be discharged. The above process is fully automated and does not require manual intervention.

　　科尔低温废水处理设备特点如下：（1）环保认证产品，出水水质稳定，占地面积小；（2）可以分离高浓缩废水中的纯水，实现废水回用；（3）不需要添加药剂，委外处理处理费用降低；（4）集成化设备，自动化，实现无人值守作业

　　The characteristics of Kohl low-temperature wastewater treatment equipment are as follows: (1) environmentally certified products, stable effluent quality, and small footprint; (2) It can separate pure water from highly concentrated wastewater and achieve wastewater reuse; (3) No need to add chemicals, reduced outsourcing processing costs; (4) Integrated equipment, automation, achieving unmanned operation

　　低温废水处理设备对金属加工而产生的废液进行低温蒸发处理,采用物理低温蒸发（38℃左右）高浓缩倍率。降低废液中COD成分，处理后的水可达到达标排放，从而减少企业委外处理废液费用。

　　The low-temperature wastewater treatment equipment performs low-temperature evaporation treatment on the waste liquid generated from metal processing, using physical low-temperature evaporation (around 38 ℃) with high concentration ratio. By reducing the COD component in the waste liquid, the treated water can achieve standard discharge, thereby reducing the cost of outsourcing waste liquid treatment for enterprises.