多槽超声波清洗机是一种特殊的清洗机，这类清洗机传出超音波，让超音波在溶液中散播，使液态与清洗槽在超声工作频率下一起震动，促使清洗实际效果大大的提高。液态与清洗槽振荡时会自身共振频率，这类振动频率是声音频率，因此我们会听见嗡嗡响。伴随着清洗领域的飞速发展，越来越多领域和公司开始使用超声波清洗机。
Multi tank ultrasonic cleaning machine is a special kind of cleaning machine. This kind of cleaning machine sends out ultrasonic wave, which makes the ultrasonic wave spread in the solution, making the liquid and cleaning tank vibrate together at the ultrasonic working frequency, thus greatly improving the actual cleaning effect. When the liquid oscillates with the cleaning tank, it will have its own resonant frequency. This kind of vibration frequency is the sound frequency, so we will hear the buzzing. With the rapid development of cleaning field, more and more fields and companies begin to use ultrasonic cleaning machines.
多槽超声波清洗机的特点是超音波清洗效果明显，使用方便。大家所听见的声音是工作频率20~20000Hz的声波频率数据信号，高过20000Hz的声波频率称作超音波，声波频率的传送按照正弦曲线竖向散播，造成很多气泡。造成汽泡的原因是液态内部分发生拉应力而产生负压力，气体压强的减少使原先溶解于液态的汽体过于饱和，而从液态逸出，变成气泡;另一原因是强劲的拉应力把液态“撕掉”成一裂缝，称之为空化。
The ultrasonic cleaning machine with multiple grooves is characterized by obvious ultrasonic cleaning effect and convenient use. The sound you hear is the acoustic frequency data signal with a working frequency of 20~20,000 Hz. The acoustic frequency higher than 20,000 Hz is called ultrasonic wave. The transmission of acoustic frequency is vertically scattered along a sinusoidal curve, causing many bubbles. The reason for the bubble is that the tensile stress in the liquid generates negative pressure, and the reduction of gas pressure makes the vapor dissolved in the liquid supersaturated, and escapes from the liquid to become a bubble; Another reason is that the strong tensile stress "tears" the liquid into a crack, which is called cavitation.

1、将需要清洗的商品放进清洗机的清洗篮中，随后将清洗篮放进清洗槽，不能将商品立即放进清洗槽里，防止破坏机器设备及清洗实际效果。依据不一样的商品或是清洗实际效果，按比例倒进清洗液，水位线少不可少于60mm，而大不能超过80mm。
1. Put the goods to be cleaned into the cleaning basket of the washing machine, and then put the cleaning basket into the cleaning tank. Do not put the goods into the cleaning tank immediately to prevent damage to the machine equipment and the actual cleaning effect. According to different commodities or the actual cleaning effect, pour the cleaning solution in proportion, with the water level no less than 60mm and no more than 80mm.
2、接通电源，开启多槽超声波清洗机按键开关，电源开关亮表明正常工作。根据物件的清洗规定，开启多槽超声波清洗机温度操纵开展温度调整。温度显示灯灭掉电加热器做到所需的标准，电加热器会停止工作，若小于设定的温度，电加热器往往会再次全自动加温。当加温温度做到商品清洗规定时，能够打开清洗计时器，依据商品清洗规定设定计时器的上班时间。
2. Turn on the power, turn on the key switch of the multi slot ultrasonic cleaning machine, and the power switch is on, indicating normal operation. According to the cleaning regulations of objects, open the temperature control of the multi tank ultrasonic cleaner to adjust the temperature. The electric heater will stop working when the temperature indicator light is off and the electric heater meets the required standard. If the temperature is lower than the set temperature, the electric heater will often be fully heated again. When the heating temperature meets the commodity cleaning regulations, the cleaning timer can be turned on, and the working time of the timer can be set according to the commodity cleaning regulations.
3、清洗结束后，在清洗槽取下清洗篮，用温开水清洗或是在另外一个并没有有机溶剂的温开水清洗槽里浸洗。物件清洗完要开展干躁、储放拼装。
3. After cleaning, take down the cleaning basket in the cleaning tank and wash it with warm water or soak it in another warm water cleaning tank with no organic solvent. After cleaning, the articles shall be dried, stored and assembled.
本文来自：多槽手动超声波清洗机更多的内容请点击：http://www.sinokohl.com我们将会为您提问的问题提供一个满意的服务，欢迎您的来电！
This article is from: Multi slot manual ultrasonic cleaner For more information, please click: http://www.sinokohl.com We will provide a satisfactory service for your questions. Welcome to call!