1. Place the machine in a ventilated and dry area? Are there ventilation holes on both sides of the fuselage? Should it be cleaned regularly? So that the air can flow smoothly.

2.往清洗槽内注入清洗溶液、不能将过热的清洗液骤然倒入清洗缸内、清洗溶液不能太少、不能在内槽无液体的状态下开机、一般若不需加热、液面大于内槽的1/3高度即可?若需加热、液面高度应大于内槽的3/4高度。

2. Inject the cleaning solution into the cleaning tank. Do not suddenly pour the overheated cleaning solution into the cleaning cylinder. Do not start the machine when there is no liquid in the inner tank. Generally, if heating is not required and the liquid level is greater than 1 / 3 of the height of the inner tank? If heating is required, the liquid level shall be greater than 3 / 4 of the height of the inner tank.

3.将超声波清洗机的三角电源插头?插入带有接地良好的单相220V±10%、50Hz交流电源插座上。

3. Connect the triangular power plug of the ultrasonic cleaning machine to the? Plug into a single-phase 220V ± 10%, 50Hz AC power socket with good grounding.

4.按动“超声”按键?电源信号灯亮?此时槽内液体开始振动空化。若需要加热则先选择加热温度?室温~80℃可调、通常加热温度为50℃?然后按动“加热”按键,不要让超声波内槽溶液在80℃以上的温度下、长期开机工作。

4. Press the "ultrasonic" button? Power signal light on? At this time, the liquid in the tank begins to vibrate and cavitate. If heating is required, select the heating temperature first? Room temperature ~ 80 ℃ adjustable, usually heating temperature is 50 ℃? Then press the "heating" button, and do not let the solution in the ultrasonic inner tank start up for a long time at a temperature above 80 ℃.

5.清洗完毕后?需把超声波清洗机的电源关掉?然后才可放掉需更换的清洗液体。

5. After cleaning? Do you need to turn off the power of the ultrasonic cleaning machine? Then the cleaning liquid to be replaced can be discharged.

实验室小型超声波清洗机的主要用途：

Main uses of laboratory small ultrasonic cleaning machine:

用途：物件的清洗、PCB板的清洗、脱气、消毒、乳化、混匀、置换、提取。

Usage: cleaning of objects, cleaning of PCB board, degassing, disinfection, emulsification, mixing, replacement and extraction.

应用行业：工矿企业，大专院校科研单位实验室；医院；电子车线；钟表眼镜店、珠宝首饰店；家庭。

Application Industry: Industrial and mining enterprises, universities, scientific research units and laboratories; hospital; Electronic vehicle line; Watch glasses shop, jewelry shop; family.

清洗物件：对附着在工件如电子产品、机械五金配件、眼镜、首饰、钟表、钱币、水果等物件表面的污物进行有效的去除。

Cleaning objects: effectively remove the dirt attached to the surface of workpieces such as electronic products, mechanical hardware accessories, glasses, jewelry, clocks, coins, fruits and other objects.

以上就是工业超声波清洗机给大家分享的主要内容，更多的精彩内容请大家继续关注我们：http://www.sinokohl.com

The above is the main content shared by the industrial ultrasonic cleaning machine. Please continue to pay attention to us for more wonderful contents: http://www.sinokohl.com