• 销售经理:18663767799(詹经理)
  • 传真:0531-68850070
  • 地址:山东省济南市历城区工业北路58号恒大城K栋3-3109室
新闻资讯当前位置:首页-新闻资讯
    电镀前超声波清洗机的清洗使用介绍
    2016-12-20 14:54:44
    超声前处理:在电镀前处理时必须根据工件的实际情况,采用适宜的方法进行有效清洗。金属基材一般分为冲压件和压铸件。冲压件上面的油污为一般冲压油,因其密度比较高所以比较容易清洗。一般可用酸洗、电解等。视厂家情况进行超声清洗则效果更佳。
    Ultrasonic pretreatment: before electroplating treatment must be based on the actual situation of the workpiece, the appropriate method for effective cleaning. Metal substrates are generally divided into stamping parts and die castings. Stamping above the oil for the general stamping oil, because of its relatively high density so easy to clean. Generally available pickling, electrolysis, etc.. Ultrasonic cleaning is better if the manufacturer.
    而锌、铝、铜等的压铸件属比较难清洗的。因压铸件中添加了各种元素,此外在成型、拉升、压延、切削、抛光的过程中还必须使用各种油品,如机油、抛光油等。对于超声波请洗机来讲,机油可以轻松去除。但抛光油分为黄油白油、绿油等,这就比较难以去除。
    And zinc, aluminum, copper and other die-casting parts are more difficult to clean. Because of pressure casting is added with various elements, in addition, in the process for molding, calendering, cutting and polishing must also use a variety of products, such as oil, polishing oil etc.. For ultrasonic washing machine, oil can be easily removed. But polishing oil into butter oil, green and so on, it is difficult to remove.
    因此,必须选择合适的超声清洗设备和清洗液。如一个材料为铜质的三角阀,抛光后即清洗,抛光油为白油、黄油,槽液温度为70℃,超声功率为1.0W/cm时,在普通清洗溶液中3-4分钟就能洗干净,得到合适的电镀表面.但在抛光油为绿油时,先必须浸泡再选用除油效果好的清洗液(本公司的德国产的S 104、鸿运除蜡水等),槽液温度也为70℃,超声功率为1.5KW/cm时,还需4-5分钟才能得到合适的电镀表面。
    Therefore, appropriate ultrasonic cleaning equipment and cleaning solution must be selected. As a material for the copper triangle valve, namely cleaning polishing, polishing oil for oil, butter, the bath temperature is 70 DEG C, the ultrasonic power is 1.0W/cm, in the ordinary cleaning solution 3-4 minutes to wash, get the right. But in the plating surface polishing oil for green, must be soaked again in addition the cleaning liquid oil well (the company's German S fortune 104, removing wax water etc.), the bath temperature is 70 DEG C, the ultrasonic power is 1.5KW/cm, it takes 4-5 minutes to get a suitable plating surface.
    本文由全自动超声波清洗机为您提供,我们的网站是: http://www.sinokohl.com我们将以全心全意的热情为您提供更优质的服务,欢迎您的访问!
    This article by the automatic ultrasonic cleaning machine to provide you, our website is: http://www.sinokohl.com we will wholeheartedly to provide you with better quality service, welcome your visit!