• 销售经理:18663767799(詹经理)
  • 传真:0531-68850070
  • 地址:山东省济南市历城区工业北路58号恒大城K栋3-3109室
新闻资讯当前位置:首页-新闻资讯
    超声波干洗机在LCD生产中的使用优势
    2016-10-18 16:34:05
    超声波干洗机其原理是由两个喷嘴产生的高压风刀有效的清除1.6-100μm的尘粒.这些尘粒从两个方向被吸附至真空腔.由于高速气流使工件表面形成了一层粘膜,而超声波能将被吸附在粘膜上的微粒分离出来,最后吸至真空腔。
    The principle is 1.6-100 ultrasonic cleaning machine M remove high-pressure air knife nozzle produced by two effective dust particles. These particles from two directions were adsorbed to a vacuum cavity. Due to the high speed airflow to the workpiece surface to form a layer of mucous membrane, and the ultrasonic can be adsorbed particles in the mucous membrane of the isolated finally to the vacuum suction cavity.
    涂胶之后,增加干式清洗机。由于湿式清洗对胶层有破坏作用,而干式清洗采用非接触式的清洗方式,所以对胶层不会产生破坏,从而降低了废品率,生产效率也随之增高。
    After coating, increase the dry cleaning machine. Because of damage to the layer of wet cleaning, dry cleaning and the cleaning method of non-contact, so will not cause damage to the adhesive layer, thereby reducing the scrap rate, the production efficiency is higher.
    PI涂膜前增加干洗机。在脱膜后清洗完成与涂PI膜之间,材料在搬运时所吸附的尘粒将被有效的清除,从而降低了废品率。 磨擦取向后增加干洗机。在磨擦取向后,产生了大量的尘粒。这些尘粒中,1.6μm以上的尘粒用干式清洗机去清除,比用湿式清洗节约了相当大的成本,因为,湿式清洗需要大量的消耗品。
    PI film before the increase of dry cleaning machine. After removal of the membrane cleaning and coating PI, the material in the removal of the dust particles adsorbed will be effectively removed, thereby reducing the waste rate. Increased friction after the dry cleaning machine. A large number of dust particles have been produced in the direction of friction. These dust particles, more than 1.6 mu m dust with a dry cleaner to clean, considerable than wet cleaning saves the cost, because the wet cleaning requires a lot of consumables.
    本文由全自动超声波清洗机提供内容支持,更多的详细精彩内容请点击我们的官方网站http://www.sinokohl.com/,我们将会全心全意为您提供满意的服务。
    In this paper, the full automatic ultrasonic cleaning machine to provide content support, more details, please click on the details of our official website http://www.sinokohl.com/, we will wholeheartedly provide you with satisfactory service.