• 销售经理:18663767799(詹经理)
  • 传真:0531-68850070
  • 地址:山东省济南市历城区工业北路58号恒大城K栋3-3109室
新闻资讯当前位置:首页-新闻资讯
    超声波清洗机的零件维护措施
    2016-8-16 14:47:21
    1:严禁从超声波清洗机控制柜顶端的进风口处溅入导电液体(如水)。否则会对清洗机的线路系统造成严重损害。
    1: it is strictly prohibited from the ultrasonic cleaning machine control cabinet at the top of the air inlet at the top of the conductive liquid (such as water). Otherwise it will cause serious damage to the line system of the washing machine.
    2:注意保持机器清洁,不使用时关掉电源。
    2: pay attention to keep the machine clean, do not use when turning off the power.
    3:避免对机器的碰撞或剧烈震动。
    3: to avoid the collision of the machine or violent vibration.
    4:远离热源。
    4: away from the heat source.
    5:机器应避免在潮湿的环境下存放。
    5: the machine should avoid storage in a humid environment.
    6:机器连续工作时间不得超过4小时,如连续工作时间过长:应旋转超声调节旋钮至"0"位,而让散热风扇继续工作,在超声波清洗不启动的状态下为超声波控制柜内持续散热至少2分钟。
    6: machine's continuous work time shall not exceed 4 hours, such as continuous long working hours: should rotary ultrasonic adjusting knob to "0", and let the cooling fan continues to operate. In ultrasonic cleaning doesn't start for ultrasonic control cabinet, the continuous radiating at least 2 minutes.
    7:经长时间运行的清洗机,在停机前应首先将功率旋钮调至零位,使用其风机再工作3-6分钟后关机,以保证电源内部热量散出。
    7: after long time running of the cleaning machine, in the downtime before should first power knob to zero and use the fan to work for 3-6 minutes after shutdown, to ensure that the power of the internal heat shed.
    8:清洗液应及时沉淀、过滤或更换,以保证清洗效果。
    8: the cleaning fluid should be timely precipitation, filtration or replacement, to ensure the cleaning effect.
    本文来自:超声波清洗机生产厂家更多的内容请点击:http://www.sinokohl.com/我们将会为您提问的问题提供一个满意的服务,欢迎您的来电!
    This article from: ultrasonic cleaning machine manufacturers more content please click: http://www.sinokohl.com/ we will provide you with a satisfactory service, welcome your call!