• 销售经理:18663767799(詹经理)
  • 传真:0531-68850070
  • 地址:山东省济南市历城区工业北路58号恒大城K栋3-3109室
新闻资讯当前位置:首页-新闻资讯
    超声波洗净机器的选择原则
    2016-4-26 9:42:30
    1、工件材质、特性、尺寸、产品的最终用途:材质主要区分金属、 玻璃 制品、 塑料 等,特性主要避免一些不适宜采用 超声波 或相应洗净液的场合,提供尺寸有利于机器内槽及功率确认,产品的最终用途说明可以让供应商根据以往经验快速提供同类或相似用途的产品工艺及解决方案;
    1, workpiece material, characteristics, size and product end use: main material to distinguish between metals, glass, plastics etc., characteristic mainly to avoid some inappropriate occasions adopting ultrasonic or corresponding cleaning liquid to provide size is conducive to confirm the machine slot and power and end use products that allows suppliers based on past experience to provide fast product process of the same or similar purposes and solutions;
    2、须去除的物质成分、特性:如 机械 加工的切削油及碎屑,去除 抛光 蜡,或 冲压 油,光学镜片的 研磨剂 等;
    2, to remove the material components, characteristics: such as mechanical processing of cutting oil and debris, removal of polishing wax, or punching oil, optical lens grinding agent, etc.;
    3、洗净剂的选择,以往使用的经验:选用水基洗剂工艺型机或有机 溶剂型 机器,考量其经剂性、生产 安全 性等;
    3, the choice of cleaning agents, the previous use of the experience: the use of water-based lotion craft machine or organic solvent based machine, consider its agent, production safety, etc.;
    4、日产量及上下游工艺装备生 产能 力:用户应根据目前最大生产能力规划设计机器产能,切忌按五年十年的发展规划盲目提出过高产能要求,因为高产能机器在不饱和产能使用条件下,其耗水耗能较大,占地相对较大,相对设备投入也高,导致其全寿命使用经济性必然不佳;
    4, production and downstream process equipment capacity: the user should according to the currently largest production capacity planning and design of machine capacity, avoid by all means is according to the development plan for the five years, ten years, blind high capacity requirements, because machine with high productivity in unsaturated conditions for the use of capacity under, consumption of the water consuming large, covers an are relatively large, relatively equipment investment is high, resulting in its whole life use economy inevitable poor;
    5、洗净工艺及干燥工艺选择:根据自身使用经验或同行使用经验,结合供应商提出的改良工艺方案选择;
    5, wash technology and drying process selection: according to their own use experience or the use of peer experience, combined with the supplier's improved process options;
    6、 设备 购置成本及全寿命使用成本核算,全寿命使用成本核算应重点包含耗电量、耗水量、 耗材 、维护成本的考量,即使采用相同工艺设计的机器,由于设计思路的不同也会导致以上使用成本核算的较大差别;
    Purchase of equipment, cost and whole life costing, life-cycle use cost accounting should focus on contains power consumption, water consumption, material consumption, maintenance cost considerations, even using the same process design of the machine, because the design will also lead to more than using a larger difference of the accounting;
    7、 废弃物 排放及环保问题:部分出口型企业还应考虑产品出口目的地区的政策性限制法规;
    7, waste emissions and environmental issues: part of the export enterprises should also consider the purpose of export products in the area of policy restrictions and regulations;
    8、当然,在采购下订单前最好与专业供应商做一次以上的洗净实验,以验证工艺效果,应成为必不可少的一个环节。
    8, of course, in the procurement of orders before the best and professional suppliers do more than one wash experiment, in order to verify the effectiveness of the process, should become an essential part of.
    本文来自:超声波清洗机生产厂家更多精彩内容请点击我们的官方网站:http://www.sinokohl.com/我们将倾情为您解答。
    This article from: ultrasonic cleaning machine manufacturers more exciting content please click on our official website: http://www.sinokohl.com/ we will give you the answer.