• 大区经理:张经理:18663767795
  • 大区经理:陶经理:13011716033
  • 技术咨询:詹经理:18663767799
  • 传真:0531-68850070
  • 地址:山东省济南市历城区工业北路58号恒大城K栋3-3109室
新闻资讯当前位置:首页-新闻资讯
    不同频率的超声波清洗机适用范围
    2015-6-23 11:13:37

    高频超声清洗适用于计算机,微电子元件的精细清洗;兆赫超声清洗适用于集成电路芯片、硅片及波薄膜的清洗,能去除微米、亚微米级的污物而对清洗件没有任何损伤。
    High frequency ultrasonic cleaning is suitable for computer, microelectronics components of fine cleaning; MHZ ultrasonic cleaning is suitable for the IC chip, wafer, and wave membrane cleaning, can remove dirt micron, submicron level for cleaning parts without any damage.
    因此从清洗效果及经济性考虑,频率一般选择在20—130KHZ范围,当然正确选择频率至关重要,而具体合适的工作频率的选取需要做一定的实验取得。
    So from the cleaning effect and economic considerations, frequency selection in 20-130 KHZ range commonly, of course is very important to correct selection of frequency, and specific selection of appropriate working frequency need to do some experiments.
    低频超声清洗适用于大部件表面或者污物和清洗件表面结合度高的场合。但易腐蚀清洗件表面,不适宜清洗表面光洁度高的部件,而且空化噪音大。全自动超声波清洗机
    Low-frequency ultrasonic cleaning for large parts surface or on the surface of the dirt and clean each occasion. But easy corrosion on the surface of the cleaning, not suitable for cleaning high surface finish of parts, and the cavitation noise.
    40khz左右的频率,在相同声强下,产生的空化泡数量比频率为20KHZ时多,穿透力较强,宜清洗表面形状复杂或有盲孔的工件,空化噪音较小,但空化强度较低,适合清洗污物与被清洗件表面结合力较弱的场合。
    Around 40 KHZ frequency, under the same intensity, the cavitation bubble number frequency is more than more than 20 KHZ, strong penetrating power, appropriate cleaning surface shape is complex or blind hole of the workpiece, cavitation noise is small, but cavitation intensity is low, suitable for cleaning on the surface of the dirt to be cleaned with binding force is weak.

    更多关于清洗设备的咨询由全自动超声波清洗机设备有限公司发表提供,详情请咨询http://www.sinokohl.com/