• 大区经理:陶经理:13011716033
  • 技术咨询:詹经理:18663767799
  • 地址:山东省济南市历城区工业北路58号恒大城K栋3-3110室
新闻资讯当前位置:首页-新闻资讯
    超声波清洗机怎么使用才能长久?
    2020-5-5 16:00:52

    超声波清洗机干燥会严重损坏超声波清洗!请将清洗液中至少一半的高度填满,不超过液位的表面上的最大空腔数量。溶剂型超声波清洗不含易燃液体腔。由于需要易燃有机溶剂,请选择TH。注意:超声波可以加速液体的蒸发,并在液体表面形成一层薄雾,这会引起与火源的燃烧接触。

    Ultrasonic cleaning machine drying will seriously damage the ultrasonic cleaning! Please fill at least half of the height of the cleaning solution, not more than the maximum number of cavities on the surface of the liquid level. Solvent ultrasonic cleaning does not contain flammable liquid cavity. Because of the need for flammable organic solvents, please select th. Note: ultrasonic can accelerate the evaporation of liquid and form a layer of mist on the liquid surface, which will cause combustion contact with the fire source.

    在不锈钢清洗罐内直接填充非酸性液体,不锈钢清洗罐可能由于缝隙腐蚀损坏时间短,家用清洗剂通常含有腐蚀性物质等原因,请选择特殊清洗剂类型。SE腐蚀清洗剂要清洗干净,建议您用塑料清洗油箱。放置清洗和清洗材料不直接接触底部的空腔。

    Fill the stainless steel cleaning tank with non acid liquid directly. The stainless steel cleaning tank may be damaged for a short time due to crevice corrosion. The household cleaning agent usually contains corrosive substances and other reasons. Please select a special cleaning agent type. Se corrosion cleaning agent should be cleaned. It is recommended that you clean the oil tank with plastic. Place cleaning and cleaning materials not in direct contact with the bottom cavity.

    QQ截图20200505155953.png

    请操作不锈钢篮,请除去大颗粒、锈渣等沉积物。这些物质会对清洗槽造成相同的损坏,如果使用其他供应商提供的粉末或颗粒清洁介质,则确保介质可以完全溶解在清洁溶液中,否则残留粉末或颗粒覆盖物的底表面会被溶解。超声波清洗工作会导致底部穿孔腐蚀或底部表面的形成,清洗液用于选择纯化材料的表面材料和污染物的合适清洗剂,请专家和产品数据提供ReCO。选择最合适的剂量和最相容的试剂结合力。如果用水作为介质,建议添加水清洗剂来改善清洗效果。Er-MA化学清洗剂含有表面活性剂,可以减少冲浪。清洗介质的ACE张力,特别是超声波清洗,使超声波分布均匀分布,液面的最大液面不应超过清洗槽的高度,超声波清洗机不应低于清洗T的高度的一半。由于新添加的洗涤剂的溶解气体成分的去除,气体成分的去除会受到很大的影响。

    Please operate the stainless steel basket and remove the large particles, rust slag and other deposits. These substances will cause the same damage to the cleaning tank. If the powder or particle cleaning medium provided by other suppliers is used, ensure that the medium can be completely dissolved in the cleaning solution, otherwise the bottom surface of the residual powder or particle cover will be dissolved. Ultrasonic cleaning work will lead to bottom perforation corrosion or bottom surface formation. The cleaning solution is used to select the appropriate cleaning agent for the surface materials and pollutants of purified materials. Please ask experts and product data to provide reco. Select the most appropriate dose and the most compatible reagent binding force. If water is used as the medium, it is recommended to add water cleaner to improve the cleaning effect. Er-ma chemical cleaner contains surfactant, which can reduce surfing. The ace tension of cleaning medium, especially the ultrasonic cleaning, makes the ultrasonic distribution uniform. The maximum liquid level of the liquid surface shall not exceed the height of the cleaning tank, and the ultrasonic cleaning machine shall not be less than half of the height of the cleaning t. Due to the removal of dissolved gas components in the newly added detergent, the removal of gas components will be greatly affected.

    超声波预超声分钟,然后在正式的超声波清洗中,可以有效地去除微气泡中的清洗介质。吹气脱气方式也可使用5-10分钟,更好的是,脱气液体能更好地汽化,并且该特性将改善材料的脱气。清洗剂将确保超声波洗衣机的使用寿命更长,在清洗温度下应选择合适的洗涤温度。实际清洗温度对清洗剂的活性和清洗效果有很大影响,请确保有足够的预热,再加上超声波清洗机的语音消音罩,恒温器打开,达到完全加热效果。清洗箱在加热时将均匀分布。在正式启动后完全预热超声波清洗。操作:设定温度和超声波时间,按打开按钮。

    Ultrasonic pre ultrasonic for minutes, and then in the formal ultrasonic cleaning, can effectively remove the cleaning medium in microbubbles. The degassing method can also be used for 5-10 minutes. Better still, the degassed liquid can be vaporized better, and this feature will improve the degassing of the material. The detergent will ensure a longer service life of the ultrasonic washing machine, and the appropriate washing temperature should be selected under the cleaning temperature. The actual cleaning temperature has a great influence on the activity and cleaning effect of the cleaning agent. Please make sure that there is enough preheating. In addition, the voice muffler of the ultrasonic cleaning machine will open the thermostat to achieve the complete heating effect. The cleaning box will be evenly distributed when heated. Fully preheat the ultrasonic cleaning after the official start-up. Operation: set temperature and ultrasonic time, press open button.

    关于全自动超声波清洗机http://www.sinokohl.com就先介绍到这里了,相信大家在实际的工作中会用到相关知识,如果您有这方面的需要,欢迎前来选购。

    About the full-automatic ultrasonic cleaning machine http://www.sinkohl.com introduced here first, I believe you will use the relevant knowledge in the actual work, if you have this need, welcome to purchase.