• 大区经理:陶经理:13011716033
  • 技术咨询:詹经理:18663767799
  • 地址:山东省济南市历城区工业北路58号恒大城K栋3-3110室
新闻资讯当前位置:首页-新闻资讯
    超声波清洗机的操作规范不可忽视的细节?
    2020-2-12 16:54:11

    相信大家平时在超声波清洗机操作必须有时一些错误的操作,可能是由于前面的步骤将做出正确的操作,以及操作,一些错误的操作可能有时会让机器出现一些问题,最终也可能会导致一些不必要的损失。所以如果你能充分了解使用清洁机的标准操作,对自己平时的操作也是大有裨益的。所以如果有附加的话一定要了解超声波清洗机使用的操作程序,我们会向您讲解关于超声波清洗机使用的标准操作程序。当然,它也适用于自动清洁机。我希望你能得到帮助。
      It is believed that the operation of ultrasonic cleaning machine at ordinary times must sometimes have some wrong operations, which may be due to the correct operation and operation of the previous steps. Some wrong operations may sometimes cause some problems of the machine, and may eventually lead to some unnecessary losses. So if you can fully understand the standard operation of using the cleaning machine, it is also helpful for your normal operation. Therefore, if there is any additional, it is necessary to understand the operating procedures of the ultrasonic cleaner. We will explain the standard operating procedures of the ultrasonic cleaner to you. Of course, it also applies to automatic cleaners. I hope you can get help.
      一、准备
      I. preparation
      1. 操作人员:穿戴防水长袍或围裙、圆帽、面罩、护目镜或防护面罩、橡胶手套或穿孔乳胶手套。
      1. Operators: wear waterproof robes or aprons, round hats, masks, goggles or protective masks, rubber gloves or perforated latex gloves.
      2. 用途:清洗剂、超声波清洗机。
      2. Application: cleaning agent, ultrasonic cleaning machine.
      其次,操作
      Second, operation
      1. 确保超声波清洗机槽底没有异物掉落,如有必须清除。
      1. Make sure that there is no foreign matter falling from the bottom of the ultrasonic cleaner groove, if any, it must be removed.
      2. 清洗液:按比例加入水和清洗剂到清洗槽中。
      2. Cleaning solution: add water and cleaning agent to the cleaning tank in proportion.
      3.打开电源开关,机器将自动检查。
      3. Turn on the power switch and the machine will check automatically.
      4. 打开脱气开关,排出气体。
      4. Turn on degassing switch to discharge gas.

    超声波清洗机生产厂家


      5. 设定溶液温度,加热清洗液,加热设定温度不应超过45℃。
      5. Set the solution temperature, heat the cleaning solution, and the heating set temperature shall not exceed 45 ℃.
      6. 初始水下清洗装置完成后,将设备放入超声波清洗机内清洗篮筐,必须装入清洗篮筐,直接放置在超声波清洗机底部的空腔内清洗。设备必须完全打开,可拆卸的设备可以将部件分开;吸管等细长中空装置的开口向下倾斜放置,保证腔内充满溶液,清洗液浸入装置2 ~ 4cm。
      6. After the completion of the initial underwater cleaning device, put the equipment into the ultrasonic cleaning machine to clean the basket, which must be put into the cleaning basket, and directly placed in the cavity at the bottom of the ultrasonic cleaning machine for cleaning. The equipment must be fully opened, and the detachable equipment can separate the parts; the opening of the long and thin hollow device such as the straw shall be placed in a downward inclined manner to ensure that the cavity is full of solution, and the cleaning solution shall be immersed in the device for 2 ~ 4cm.
      7. 盖上超声波清洗机盖,设定清洗时间,开始超声波清洗。超声波清洗时间在3 ~ 5分钟,不应超过10分钟。
      7. Cover the cover of the ultrasonic cleaning machine, set the cleaning time and start the ultrasonic cleaning. The ultrasonic cleaning time is 3-5 minutes, not more than 10 minutes.
      8. 超声波清洗后,应对设备进行清洗、漂洗、漂洗、消毒。超声波清洗结束后,将超声波清洗机中的液体取出。
      8. After ultrasonic cleaning, the equipment shall be cleaned, rinsed, rinsed and disinfected. After the ultrasonic cleaning, take out the liquid in the ultrasonic cleaning machine.
      以上就是超声波清洗机生产厂家对超声波清洗机操作规范的详细介绍,想要了解更多请点击官网http://www.sinokohl.com
      The above is the detailed introduction of the ultrasonic cleaner manufacturer to the operation specifications of the ultrasonic cleaner. For more information, please click http://www.sinkohl.com