• 大区经理:陶经理:13011716033
  • 技术咨询:詹经理:18663767799
  • 传真:0531-68850070
  • 地址:山东省济南市历城区工业北路58号恒大城K栋3-3109室
新闻资讯当前位置:首页-新闻资讯
    超声波清洗机时间设定要求?
    2020-1-13 16:19:34

      本套清洗时间是根据清洗对象的具体设定,具体对象具体设定清洗时间,简单了解一下决定超声波清洗时间的因素?

      This set of cleaning time is based on the specific setting of the cleaning object, and the specific setting of the cleaning time of the specific object?

      1. 超声波的力量。超声波功率越大,自然清洗时间越短,一般清洗首饰、项链手链,3-5分钟即可清洗干净。如果是在工厂清洗五金配件或汽车配件,一般需要15-30分钟。

      1. The power of ultrasound. The higher the ultrasonic power, the shorter the natural cleaning time. Generally, jewelry and necklace bracelet can be cleaned in 3-5 minutes. If you are cleaning hardware or auto parts in the factory, it usually takes 15-30 minutes.

      加入油粉或除锈剂,使清洗时间缩短20分钟。特殊情况下,超声波功率太小,清洗根本不干净,不是长时间清洗的问题。

    超声波清洗机生产厂家

      Add oil powder or rust remover to shorten the cleaning time by 20 minutes. Under special circumstances, the ultrasonic power is too small and the cleaning is not clean at all, which is not a problem of long-term cleaning.

      2. 超声波的频率。洁萌生产的超声波清洗机主要为28KHz或40KHz,可根据客户要求选择。超声波频率越高,清洗效果越好。工业上用于去除重油、锈斑,工业超声波清洗机去油除锈时间更长,但清洗时间可调。

      2. Ultrasonic frequency. The ultrasonic cleaning machines produced by Gemeng are mainly 28kHz or 40KHz, which can be selected according to the requirements of customers. The higher the ultrasonic frequency, the better the cleaning effect. It is used to remove heavy oil and rust in industry. The time of oil removal and rust removal of industrial ultrasonic cleaning machine is longer, but the cleaning time is adjustable.

      3.清洗剂也会影响清洗时间。清洗剂一般除油剂、除锈剂、油粉、除锈剂、除蜡剂、松香剂等试剂外,针对不同的对象选择不同的清洗剂,主要是起到化学清洗的作用,超声波清洗机本身就是起到物理清洗的作用。

      3. Cleaning agent will also affect cleaning time. In general, except for oil agent, rust remover, oil powder, rust remover, wax remover, rosin agent and other reagents, different cleaning agents are selected for different objects, mainly for chemical cleaning, and ultrasonic cleaning machine itself plays the role of physical cleaning.

      物体本身的清洁程度。这是不可忽视的因素,舱底厚,杂质多,重油污,锈斑多,物体本身结构复杂,细缝和凹凸多,清洁时间较长。

      The cleanliness of the object itself. This is a factor that cannot be ignored. The bilge is thick, there are many impurities, heavy oil stains, rust spots, complex structure of the object itself, many fine seams and bumps, and the cleaning time is long.

      以上就是超声波清洗机生产厂家对超声波清洗机时间设定要求都有哪些的详细介绍,想要了解更多请点击官网http://www.sinokohl.com

      The above is a detailed introduction to the time setting requirements of ultrasonic cleaner provided by the manufacturer of ultrasonic cleaner. For more information, please click http://www.sinkohl.com