• 大区经理:张经理:18663767795
  • 大区经理:陶经理:13011716033
  • 技术咨询:詹经理:18663767799
  • 传真:0531-68850070
  • 地址:山东省济南市历城区工业北路58号恒大城K栋3-3109室
新闻资讯当前位置:首页-新闻资讯
    超声波清洗机对盲孔清洗步骤有哪些
    2019-10-9 18:38:39
    超声波清洗机当局部设计包括盲孔和/或凹腔时,可能会陷进去。 水或污染物,局部通常需求定位在特定的位置。 方向,以确保这些孔在 处置。
    When the local design of the ultrasonic cleaner includes blind holes and/or concave cavities, it may sink in. Water or pollutants, locally usually need to be located in a specific location. Direction to ensure that these holes are disposed of.

    一个“盲孔”是一个只要一个点的液体进入的洞, 当钻出的孔不穿过相反的孔时,就产生了。 资料的侧面。因而,液体只能从孔进入或出口。 一端。假如有一个有盲孔的局部被降低到清洁流体中, 孔面朝上,孔肯定会用清洗液填满, 将被超声波清洗。但是,当该局部从 清洗液要转移到冲洗槽中,清洗液不需求清洗。 从洞里抽出来。然后,清洗清洗液从 超声波清洗槽到冲洗槽,这会更快地污染在,一种通常称为洗濯剂拖出.。 此外,由于在从冲洗槽中移除时,孔也不会漏出, 这个洞的枯燥需求长时间,由于 液体的枯燥时间要比有薄层的零件长得多。 水的。

    全自动超声波清洗机

    A "blind hole" is a hole in which only one point of liquid enters. When the drilled hole does not pass through the opposite hole, it produces. The profile of the data. As a result, liquids can only enter or exit through holes. One end. If a part with blind holes is lowered to the clean fluid and the face of the hole is upward, the hole will definitely be filled with cleaning fluid and will be cleaned by ultrasonic wave. However, when the part is transferred from the cleaning fluid to the flushing tank, the cleaning fluid does not need to be cleaned. Pull it out of the hole. Then, the cleaning fluid is drawn out from the ultrasonic cleaning tank to the washing tank, which can contaminate the tank more quickly, a commonly called detergent. In addition, because the hole will not leak out when removed from the flush, the boredom of the hole takes a long time, because the liquid boredom time is much longer than that of parts with thin layers. Water.
    在试图完成零残留时,拖放是十分关键的。 清洗结果,由于洗濯剂残留物在漂洗水会产生斑点。 在枯燥后的零件上,相似于在盘子中发现的洗濯剂斑点 洗碗机。固然有一些办法能够处理这个条件,例如 增加额外的冲洗槽,会增加设备的本钱,而且 去离子水的耗费量也会增加。
    Drag-and-drop is critical when trying to achieve zero residue. As a result of the cleaning, the residue of the detergent will produce spots in the rinsing water. On dry parts, it is similar to the detergent spotted dishwasher found in dishes. Although there are some ways to deal with this condition, such as adding additional flushing tank, it will increase the cost of equipment, and the consumption of deionized water will also increase.
    假如盲孔是面向清洗槽底部的,孔就会 不要用清洗液填充,避免超声波清洗。 面积 空气包封率一种条件,在另一种状况下掩盖 我们的技术信息局部的文件。超声波清洗不会发作在 任何有空气的区域。
    If the blind hole is facing the bottom of the cleaning tank, the hole will not be filled with cleaning fluid to avoid ultrasonic cleaning. Area air encapsulation rate (AAE) is a condition under which local documents of our technical information are concealed under another condition. Ultrasound cleaning does not occur in any area with air.
    肃清盲孔的佳办法是将零件定位在这样的位置。 当将孔降到 超声波清洗罐。这将使空腔充溢清洁。 流体,并将允许排水孔时,局部从 清洁浴。由于rinsewater也会从孔中排出,枯燥 效率会进步。
    The best way to eliminate blind holes is to locate the parts in this position. When the hole is lowered to the ultrasonic cleaning tank. This will make the cavity full and clean. Fluid and will allow drainage holes when partially cleaned from the bath. Because rinsewater is also discharged from the hole, the dryness efficiency will improve.
    不幸的是,有局部设计有盲孔 不同的平面或方向,使它简直不可能充沛地 对等地处置一切的洞。关于这些应用程序,运用空气刀 能够在转移之前将液体从这些孔中撤出。 它们到临近的超声波清洗机,或者手持的紧缩空气棒能够运用。 手动操作的系统来执行相同的功用。零件定位 仍须尽量减少被困液体的数量 局部被清算。
    Unfortunately, there are local designs with different planes or directions of blind holes, which make it impossible to dispose of all holes equally abundantly. For these applications, air knives can be used to remove liquids from these holes before transferring. They can be used in adjacent ultrasonic cleaners or hand-held compact air rods. Manually operated systems perform the same function. Parts positioning still needs to minimize the number of trapped liquids to be partially liquidated.
    以上是全自动超声波清洗机厂家为大家介绍的相关内容,本文来源:http://www.sinokohl.comAbove is the related content of the full automatic ultrasonic cleaner manufacturer. This article is from http://www.sinokohl.com.