• 大区经理:张经理:18663767795
  • 大区经理:陶经理:13011716033
  • 技术咨询:詹经理:18663767799
  • 传真:0531-68850070
  • 地址:山东省济南市历城区工业北路58号恒大城K栋3-3109室
新闻资讯当前位置:首页-新闻资讯
    使用多槽式超声波清洗机要留意什么?
    2019-9-19 20:03:32
    在很多范畴都能够运用多槽式超声波清洗机来停止物品的清洗,由于这样清洗出来的物品比手工清洗的干净水平更高,但是要想取得更好的清洗质量,大家除了要依照请求来停止操作各项程序之外,还需求理解多槽式超声波清洗机的这些运用留意事项。
    In many areas, we can use multi-trough ultrasonic cleaner to stop the cleaning of items. Because the cleaning level is higher than manual cleaning, in order to achieve better cleaning quality, we need to understand multi-trough ultrasonic cleaner besides stopping operating procedures according to the request. Notes on the use of washing machines.
    超声波清洗机
    Ultrasonic cleaning machine
    1.清洗篮
    1. cleaning basket

    在运用多槽式超声波清洗机清洗一些较小的零件物品时经常需求运用清洗筐,但是清洗筐上的网眼会惹起超声衰减,所以要特别惹起留意,留意选择网眼大小适宜的清洗篮,此外倡议选用不锈钢材质的清洗篮,尽量不要运用塑胶框,这样可以避免静电的产生。

    超声波清洗机生产厂家

    Cleaning baskets are often needed when using multi-groove ultrasonic cleaner to clean some small parts and articles, but the meshes on the baskets will cause ultrasonic attenuation. Therefore, special attention should be paid to the selection of appropriate mesh size cleaning baskets. In addition, it is suggested that stainless steel cleaning baskets should be selected, and plastic should not be used as far as possible. Rubber frame, so as to avoid the generation of static electricity.
    2.清洗时间
    2. Cleaning time
    通常在清洗时每道工序的时间定为三至五分钟,假如被清洗物品的外表积比拟大,或者工件的构造较为复杂时,要留意依据实践状况酌情调整多槽式超声波清洗机的清洗时间。若被清洗物容易呈现堆叠以及粘附的现象,那么在将被清洗物放入及取出槽液的时分能够颤动一下工件,让清洗剂充沛与工件接触以进步清洗效果。
    Usually, the cleaning time of each process is set at three to five minutes. If the surface area of the cleaned items is comparatively large or the structure of the workpiece is complex, we should pay attention to adjusting the cleaning time of the multi-trough ultrasonic cleaner according to the practical situation. If the cleaned material is easy to stack and adhere, it can vibrate the workpiece when the cleaned material is put into and taken out of the tank liquid, so that the cleaner can contact the workpiece abundantly to improve the cleaning effect.
    3.加液和串槽
    3. Adding liquid and grooving
    用多槽式超声波清洗机清洗工件要留意槽液不能加的太满,以免发作两槽超声波清洗剂之间互相混合以及沥干时清洗筐底部粘液的现象。此外,多槽式超声波清洗机的每个槽应为独立的操作工序,留意不要将两槽清洗剂互相串用或人为减少操作工序以及清洗的操作时间。
    When cleaning the workpiece with multi-trough ultrasonic cleaner, it is necessary to pay attention to the excessive filling of the trough liquid, so as to avoid the mixing of the two troughs of ultrasonic cleaners and the phenomenon of cleaning the bottom mucus of the basket during drainage. In addition, each groove of multi-groove ultrasonic cleaner should be an independent operation process. Be careful not to use the two grooves cleaner in tandem with each other or artificially reduce the operation process and cleaning operation time.
    以上是超声波清洗机生产厂家为大家介绍的及时运用多槽式超声波清洗机清洗工件时需求大家多留意的几点。由于,多槽式超声波清洗机虽然具有十分高的清洁性能,但是那是在依照及规则和请求停止操作的状况下,只要在运用超声波清洗机清洗工件时按程序执行才会得到最好的清洗效果。想要了解更多内容,欢迎访问网站:http://www.sinokohl.comAbove is the ultrasonic cleaner manufacturer for you to introduce the timely use of multi-groove ultrasonic cleaner cleaning workpieces, we need to pay more attention to a few points. As a result, although the multi-trough ultrasonic cleaner has a very high cleaning performance, it is in accordance with the rules and requests to stop operation, as long as the use of ultrasonic cleaner cleaning workpiece in accordance with the program will be the best cleaning effect. For more information, please visit the website: http://www.sinokohl.com.