• 大区经理:张经理:18663767795
  • 大区经理:陶经理:13011716033
  • 技术咨询:詹经理:18663767799
  • 传真:0531-68850070
  • 地址:山东省济南市历城区工业北路58号恒大城K栋3-3109室
新闻资讯当前位置:首页-新闻资讯
    超声波清洗机生产厂家告诉您换能器常见问题
    2019-5-23 11:35:05
    超声波清洗机生产厂家告诉您换能器常见问题

          The manufacturer of ultrasonic cleaner tells you the common problems of transducer

          随着小型超声波清洗机的不时开展,家用型已进入千家万户,小型超声波清洗机正改动人们的生活。

         With the development of small-scale ultrasonic cleaning machine, household-type has entered millions of households. Small-scale ultrasonic cleaning machine is changing people's lives.
          许多人买来用于清洗日常小用品,如眼镜、首饰、珠宝、金银、高档手表、杯子、假牙、水果、蔬菜等。
          Many people buy daily necessities for cleaning, such as glasses, jewelry, jewelry, gold and silver, high-end watches, cups, dentures, fruits, vegetables and so on.
         人们的生活方式正在转变,以往手工清洗的一些事务交给了小型超声波清洗机来完成,省心省事省力。
         People's lifestyle is changing. In the past, some manual cleaning tasks were handed over to a small ultrasonic cleaner to complete, which saves time and effort.
         小型超声波清洗机就像一个机器人,更精确的说是家庭清洁机器人,专职为家庭清洗清洁物件,人们开端喜欢上了这个任劳任怨地机器人。或许,在未来,家用机器人将会真正呈现,介时,清洗功用会在小型超声波清洗机的根底上开展出来也是十分有可能的哦。
        Small-scale ultrasonic cleaning machine is like a robot, more precisely a home cleaning robot, which is dedicated to cleaning household items. People began to like this tireless robot. Perhaps, in the future, home robots will really show up. In time, cleaning function will be developed on the basis of small ultrasonic cleaners, which is also very possible.
        超声波清洗机换能器有哪些常见问题?

        What are the common problems with transducer of ultrasonic cleaner?

                                超声波清洗机生产厂家

         超声波清洗机振子受潮,能够用兆欧表检查与换能器相衔接的插头,其中2脚为超声波 换能器的正极,3脚是换能器的负极而且与换能器的外壳相连。检查,2 3 脚间的绝缘电阻值就能够判别根本状况,普通请求绝缘 电阻大于30兆欧以上。假如达不到这个绝缘 电阻值,普通是换能器受潮,能够把换能器整体(不包括喷塑外壳)放进烘箱设定100 ℃左右烘干3小时或者运用电吹风去潮至阻值正常为止。换能器根本有以下两种状况:1、压电陶瓷片碎裂,击穿。肉眼能够直观的看见。根本是由于换能器与清洗槽体的衔接胶水松脱惹起;2、振子受潮,绝缘电阻降落,小于50兆欧。根本是由于运用环境湿润或者换能器装置是的工艺处置不到惹起。
          The oscillator of the ultrasonic cleaner is damped and can check the plug connected with the transducer by megaohm meter. Two of the feet are the positive pole of the ultrasonic transducer and three of the feet are the negative pole of the transducer and are connected with the outer shell of the transducer. Inspection, 23 feet between the insulation resistance value can be used to determine the basic situation, the ordinary request insulation resistance more than 30 megaohms. If the insulation resistance can not reach this value, the transducer is usually damped, and can put the whole transducer (excluding the plastic-sprayed shell) into the oven to set a temperature of about 100 degrees C for drying for 3 hours or use the hairdryer to damp until the resistance value is normal. The transducer has two basic conditions: 1. Piezoelectric ceramic fragmentation and breakdown. Visible to the naked eye. The reason is that the bonding glue between the transducer and the cleaning groove is loosened. 2. The oscillator is damped and the insulation resistance drops, which is less than 50 MHz. The fundamental reason is that the use of environmental humidity or transducer device is not caused by the process disposal.
         超声波清洗机生产厂家告诉您换能器常见问题,您了解了吗?想要了解更多,请关注我们网站http://www.sinokohl.com