服务热线电话

400-6188-756

电解超声波清洗机的原因有哪些?

来源:http://www.sinokohl.com/ 时间: 2022-11-26 浏览次数: 0

1.电解清洗是利用电解作用将金属表面的污垢去除的清洗方法。电解是在电流作用下物质发生化学分解的过程。在电解过程中,金属表面的污垢开始脱落,在超声波的冲击下加速了剥离。在在金属表面沾有的硫化物、瓦斯气、树脂碎末、动植物油、矿物油、石蜡、积炭、氧化层,用电解的方法把这些污垢去除叫电解脱脂。
1. Electrolytic cleaning is a cleaning method that uses electrolysis to remove the dirt on the metal surface. Electrolysis is the process of chemical decomposition of substances under the action of electric current. In the electrolysis process, the dirt on the metal surface began to fall off, which accelerated the peeling under the impact of ultrasonic. Removal of sulfide, gas, resin chips, animal and vegetable oils, mineral oils, paraffins, carbon deposits and oxide layers on metal surfaces by electrolysis is called electrolytic degreasing.
2.当电流通过含有特殊配方的电解质的水溶液时,在电解槽的正极附近产生氧气,负极产生氢气。把要清洗的金属部件放入电解槽的正极,在电解过程中,在金属表面会有细小的氢气产生,这些小气泡促使污垢从金属表面剥离
2. When the current passes through the aqueous solution containing electrolyte with special formula, oxygen is generated near the positive pole of the electrolytic cell and hydrogen is generated at the negative pole. Put the metal parts to be cleaned into the positive pole of the electrolytic cell. During electrolysis, small hydrogen will be generated on the metal surface, and these small bubbles will promote the dirt to peel off from the metal surface
3.超声波清洗是利用40KHZ的高频电源,使换能器由电能转换机械能的过程。在这过程中换能器向清洗槽溶液传递巨大的能量,在液体中产生正压和负压区,形成数以万计的空穴气泡,在不断的形成爆炸,冲击被清洗金属物表面,使金属表面的污垢快速脱离。
3. Ultrasonic cleaning is a process that uses 40KHZ high-frequency power supply to convert the transducer from electrical energy to mechanical energy. In this process, the transducer transfers huge energy to the cleaning tank solution, generating positive and negative pressure areas in the liquid, forming tens of thousands of hole bubbles, and constantly forming explosions, impacting the surface of the metal to be cleaned, so that the dirt on the metal surface can be quickly separated.
多槽手动超声波清洗机
4.循环系统是由耐腐蚀的磁力泵、过滤器组成自循环,让清洗脱落的污垢迅速被过滤棉芯隔离,减少液面漂浮物。同时可加速溶液的电解,净化溶液的利用率。
4. The circulating system is a self circulating system composed of corrosion-resistant magnetic pump and filter, so that the dirt falling from cleaning can be quickly isolated by the filter cotton core to reduce the floating objects on the liquid surface. At the same time, it can accelerate the electrolysis of solution and purify the utilization rate of solution.
5.超声波清洗机应用在涂装处理的技术超声波清洗机器涂装前处置工艺非常重要,一般保守工艺是脱脂、水洗、盐酸除锈、水洗、中和、水洗、表调、水洗、磷化、水洗、烘干。此工艺大弊端是对结构复杂零件酸洗除锈后的残酸很难冲洗干净,尤其是焊接组合件磷化后,其夹缝内含有的残液影响后道工序的加工。
5. The technology of ultrasonic cleaning machine applied in coating treatment The disposal process of ultrasonic cleaning machine before coating is very important. Generally, the conservative processes are degreasing, water washing, hydrochloric acid rust removal, water washing, neutralization, water washing, surface conditioning, water washing, phosphating, water washing and drying. The biggest disadvantage of this process is that it is difficult to clean the residual acid after pickling and derusting for parts with complex structure, especially after the welding assembly is phosphatized, the residual liquid contained in the seam affects the processing of the next process.
6.工件喷涂后,时间不长沿着夹缝呈现锈蚀现象,波坏涂层表面。严重影响产品外观和内在质量。如摩托车车轮、油箱、车架、防盗门等。经过近几年对超声波清洗机技术在磷化处理中的研究实践,提高产品喷涂质量,防止涂装件返锈方面,已取得良好效果。超声波清洗机漂洗工件在除油、除锈、水洗、表调、磷化等工艺中渗透在焊接夹缝内的液体很难排出,且水洗不能完全干净,湿热条件下夹杂物极易造成工件泛黄、生锈。
6. After the workpiece is sprayed, it will rust along the seam for a short time, and the coating surface will be damaged. It seriously affects the appearance and internal quality of the product. Such as motorcycle wheel, fuel tank, frame, anti-theft door, etc. In recent years, through the research and practice of ultrasonic cleaning machine technology in phosphating treatment, good results have been achieved in improving product spraying quality and preventing coating parts from rusting. It is difficult to discharge the liquid that permeates in the welding seam during the processes of degreasing, rust removal, water washing, surface conditioning, phosphating, etc. of the workpiece rinsed by the ultrasonic cleaning machine, and the water washing can not completely remove it, and the inclusions are very easy to cause yellowing and rusting of the workpiece under hot and humid conditions.
7.如果这些残液在烘干过程中不能完全干固,随后粉末喷涂以高温烘干时,残液由于热膨胀的作用将渗出焊缝,影响涂料与金属表面的结合,造成涂层的附着力下降甚脱离。.超声波清洗机工艺参数超声波清洗温度是影响清洗速度的重要因素,适当提高清洗温度可增加空化能力、缩短清洗时间,但超越一定温度,由于蒸气压力增加反而降低空化作用,因此必需坚持一定的温度。试验标明水溶性介质一般在50℃ 5效果佳。
7. If these residues cannot be completely dried in the drying process, then when the powder is sprayed and dried at high temperature, the residues will seep out of the weld due to thermal expansion, affecting the combination of the paint and the metal surface, causing the adhesion of the coating to decline or even detach Process parameters of ultrasonic cleaning machine Ultrasonic cleaning temperature is an important factor affecting the cleaning speed. Properly increasing the cleaning temperature can increase the cavitation capacity and shorten the cleaning time, but exceeding a certain temperature will reduce the cavitation effect due to the increase of steam pressure. Therefore, a certain temperature must be maintained. The test shows that the water soluble medium is generally the best at 50 ℃ 5.
以上的精彩内容来自:多槽手动超声波清洗机更多的精彩内容请点击我们的网站:http://www.sinokohl.com
The above highlights come from: more highlights of the multi slot manual ultrasonic cleaner, please click our website: http://www.sinokohl.com

联系我们

詹老师:18663767799(微信同号)

陶老师:13011716033(微信同号)

张老师:18663767790(微信同号)

:1476171179/1500705758

:jnkergs@163.com

:地址:山东省济南市济阳区创业路与启航街交叉口南40米

关注科尔

  • 扫一扫了解更多

  • 扫一扫了解更多

备案号:鲁ICP备18049717号-1  鲁公网安备37011202000628号