通过式清洗机是采用特制的链条和传送带来运送工件，具有清洗、漂洗、吹水、烘干、涂油等功用。作为一款新颖的连续运送式清洗设备，通过式清洗机由人工将工件放在运送带上，工件自动通过各清洗室进行清洗，清洗液自动流入回液箱，通过净化处理可循环使用，并设有雾气回收装置，能够不外接管路。

The through type cleaning machine uses specially designed chains and conveyor belts to transport workpieces, and has functions such as cleaning, rinsing, blowing water, drying, and oiling. As a novel continuous transportation cleaning equipment, the through type cleaning machine manually places the workpiece on the conveyor belt. The workpiece automatically passes through various cleaning rooms for cleaning, and the cleaning solution automatically flows into the return tank. It can be recycled through purification treatment and is equipped with a mist recovery device, which can avoid external pipelines.

通过式清洗机具有多工位，功用全，结构合理，操作便利，清洗作用好的长处，关于流水线零件的清洗，改善劳动环境，提高清洗质量有重要意义。其使用范围广泛，适用于各种五金零件，压铸件，液压件，齿轮，轴承，汽车零部件等各种制造业。

The through type cleaning machine has the advantages of multiple workstations, full functionality, reasonable structure, convenient operation, and good cleaning effect. It is of great significance for the cleaning of assembly line parts, improving the working environment, and improving cleaning quality. It has a wide range of applications and is suitable for various manufacturing industries such as hardware parts, die-casting parts, hydraulic components, gears, bearings, and automotive components.

通过式清洗机作业前先检查清洗液的配方浓度和配方比例是否适宜，水箱液面高度是否够；别离调定清洗液箱和漂洗液箱的电接点温度计为50-60度；用钥匙将电源操控开关，置于开方位；敞开加热器，使其开端自动加温；敞开浮油扫除装置开端浮油扫除，因而式水泵未敞开，水面平静，排油作用好。

Before operating the through type cleaning machine, check whether the formula concentration and proportion of the cleaning solution are suitable, and whether the liquid level in the water tank is high enough; Set the electric contact thermometer of the cleaning solution tank and rinsing solution tank separately to 50-60 degrees; Use the key to control the power switch and place it in the open position; Turn on the heater to start automatic heating; Open the floating oil cleaning device to start the floating oil cleaning, so the water pump is not open, the water surface is calm, and the oil drainage function is good.

等温度升到预订值后即开端作业，操作者根据需要选择开关，按每个单动按钮，使水泵，吸雾，运送等全部动作。当机器运行后，操作工人便能够在装料口不断地把零件装载运送网带，清洗，漂洗，吹干，输出，在卸料口取下清洗好的零件。

After the temperature rises to the predetermined value, the operation begins. The operator selects the switch as needed and presses each single action button to activate the water pump, mist suction, transportation, and other functions. After the machine is running, the operator can continuously load and transport the parts onto the conveyor belt at the loading port, clean, rinse, blow dry, output, and remove the cleaned parts at the unloading port.

通过式清洗机清洗作业完毕后，当零件取下，按中止按钮，全机中止。清洗液应定时添加自来水和必定比例的金属清洗液以弥补消耗，使液面保持在必定高度，如果清洗作用达不到工艺要求时，应全部更换清洗液。整理设备尘垢后，封闭电源。

After the cleaning operation of the through type cleaning machine is completed, when the parts are removed, press the stop button to stop the entire machine. The cleaning solution should be regularly added with tap water and a certain proportion of metal cleaning solution to compensate for consumption, keeping the liquid level at a certain height. If the cleaning effect does not meet the process requirements, all cleaning solutions should be replaced. After cleaning up equipment dust and dirt, turn off the power supply.