服务热线电话

400-6188-756

如何使用小型超声波清洗机除油除腊

来源:http://www.sinokohl.com/ 时间: 2022-05-14 浏览次数: 2

如何使用小型超声波清洗机除油除腊
How to use small ultrasonic cleaning machine to remove oil and wax
一、首先把清洗篮正确的安装在清洗槽内,一搬是用挂勾挂在清洗槽的两边,因为小型超声波清洗机的换能器装在清洗槽底部,如果不用清洗篮的话,清洗物体的重量全部压在底部,会严重降低超声波清洗机的清洗效果与效率。
1、 First, install the cleaning basket correctly in the cleaning tank. First, hang it on both sides of the cleaning tank with hooks, because the transducer of the small ultrasonic cleaning machine is installed at the bottom of the cleaning tank. If the cleaning basket is not used, the weight of the cleaning object will be pressed at the bottom, which will seriously reduce the cleaning effect and efficiency of the ultrasonic cleaning machine.
二、把清洗物体放在清洗篮内物体不宜太密集,数量合适即可,否则会影响效果,然后往清洗槽内添加清水浸没清洗物体即可,然后再添加一定比例的除油或者除腊的清洗济。
2、 Put the cleaning objects in the cleaning basket. The objects should not be too dense, and the quantity should be appropriate, otherwise the effect will be affected. Then add clean water to the cleaning tank to immerse the cleaning objects, and then add a certain proportion of oil or wax removal cleaning oil.
三、按照说明书要求连接电源,检查指示灯是否正常亮起,如果一切正常,打开超声控制开关,或旋钮(具体看是机械控制,还是数码控制) 调好清洗时间一般除油或者除腊15-20分钟即可(一次清洗把时间延到30分钟,因为这时水温还没有达到60-70度的工作要求),这时会看到清洗槽里面的液体会有很明显的,水纹,或者说无数的汽泡,把手伸进去会有明显的麻麻的感觉。这说明超声波清洗机已经在开始工作了。
3、 Connect the power supply according to the requirements of the manual and check whether the indicator light is on normally. If everything is normal, turn on the ultrasonic control switch or the knob (see whether it is mechanical control or digital control) and adjust the cleaning time. Generally, the oil or wax can be removed for 15-20 minutes (the time of one-time cleaning is extended to 30 minutes, because the water temperature has not reached the working requirements of 60-70 degrees), At this time, you will see that the liquid in the cleaning tank will have obvious water marks, or countless bubbles, and you will feel numb when you put your hand in it. This shows that the ultrasonic cleaning machine has begun to work.
四、安照说明书要求,把清洗温度调节到,60--70度即可。 如果觉得燥音太大的话可以把降音盖盖上,时间到之后把清洗物体拿起来查看是否已达到清洗要求。如果超声波清洗机没问题,或者你清洗的物体没有特殊要求的话基本上都可以达到你的要求的。
4、 According to the requirements of the installation manual, adjust the cleaning temperature to 60-70 degrees. If you feel that the dry sound is too loud, you can cover the sound reduction cover and pick up the cleaning object after the time is up to check whether the cleaning requirements have been met. If the ultrasonic cleaning machine is OK, or the object you clean has no special requirements, it can basically meet your requirements.
本文的精彩内容由超声波清洗机价格提供知识提供,本网站还有很多的精彩内容,更多的内容您可以点击进入:http://www.sinokohl.com我们有专门的客服为您解答问题
The wonderful contents of this article are provided by the price and knowledge of ultrasonic cleaning machine. There are many wonderful contents on this website. You can click to enter more contents: http://www.sinokohl.com We have special customer service to answer your questions

联系我们

詹老师:18663767799(微信同号)

陶老师:13011716033(微信同号)

张老师:18663767790(微信同号)

:1476171179/1500705758

:jnkergs@163.com

:地址:济南市先行区太平街道机械装备产业园创业路二号

关注科尔

  • 扫一扫了解更多

  • 扫一扫了解更多

备案号:鲁ICP备18049717号-1 技术支持:网站建设·推广运营